SAV | Mechanical Services & Supplies← All products

Products/EOCR-SS2

EOCR-SS2

Samwha EOCR

EOCR-SS2

EOCR-SS / SE2

สอบถามสต็อก

รุ่นเก่า (legacy) SAV ยังจำหน่ายอยู่ — EOCR ดั้งเดิมของ Samwha Engineering ก่อนมาเป็นแบรนด์ Schneider | 2CT ในตัว หน่วงเวลาสตาร์ท (D-TIME) และเวลาทริป (O-TIME) ปรับแยกกันได้ ลักษณะเวลาแบบ Definite | ป้องกัน overcurrent, phase loss, locked rotor | ตัวที่มีในสต็อกเป็น Type 60-440 : ตั้งกระแส 5~60/70A ไฟเลี้ยง 320~480VAC ติดราง DIN 35 มม. | รุ่น inverse time คือ EOCR-SS1

ดาวน์โหลดเอกสารDOWNLOAD

Main Feature

  • Two integral current transformers — no external CT needed within the rated range
  • Independently adjustable starting trip delay (D-TIME) and trip time (O-TIME)
  • Definite time characteristic (the inverse-time sibling is the EOCR-SS1)
  • Run monitor and troubleshooting from two LEDs on the dial plate
  • TEST and RESET buttons on the front face
  • Compact 35 mm DIN rail mounting

Legacy status

  • Original Samwha Engineering Co., Ltd. product, made in Seoul, Korea — predates the Schneider Electric EOCR branding
  • SAV continues to stock it for like-for-like replacement in panels already built around it

Technical Specification

Nameplate of the stocked unit (photographed from SAV stock)
ModelEOCR-SS2
Type60-440
Current range5 ~ 60/70 A
Power supply320~480 VAC
Maker삼화기연주식회사 SAMWHA Engineering Co., Ltd. — Made in Seoul, Korea
MarksCE, recyclable
Front panelMON. (green) and TRIP (red) LEDs, D-TIME 1–50 sec, LOAD (A) 5–70, O-TIME 1–10 sec, TEST and RESET
TerminalsL1, L2/05, 08, 96, 95, 98
Protection (EOCR catalog, EOCR-SS1 / SS2 section)
Protective itemsover-current, phase loss, locked rotor
Over-current trip timeO-TIME
Phase loss trip timeO-TIME
Locked rotor trip timeO-TIME + D-TIME
Time characteristicdefinite — shares the definite-time curve of the EOCR-SP2 / SS2 / DS2(T) / DS3(T)
Protection ranges0.5–6 A, 3–30 A, 5–60 A, plus an external CT option above 60 A
D-TIME (starting trip delay)1–50 sec
O-TIME (trip time)0.2–10 sec
Ratings and construction
Output contact, X1 mode1-SPST, 3 A / 250 VAC resistive, normally energised
Output contact, X2 mode1-SPDT, 3 A / 250 VAC resistive, normally de-energised
Indication2-LED, trip and trip-cause
Mounting35 mm DIN rail
Current transformers2CT, integral
LED display table (printed on the unit)
Columnsgreen LED (MON.) and red LED (TRIP), each shown as on / off / flicker
Conditions listedStop, Run, Starting, Overloading, O.C Trip, Locked Trip, Phase Loss Trip
Phase loss trip additionally indicates the affected phase R, S or T
Ordering
Current setting codes05 (0.5–6 A), 30 (3–30 A), 60 (5–60 A), 100~ (over 60 A, external CT)
Control voltage codes24 (24 VAC/DC, 50/60 Hz), 110, 220 — per the EOCR-SS1 / SS2 page of SAV's catalog edition
The stocked unit is Type 60-440, i.e. the 60 current code on a 440 V class control supply (320~480 VAC). That 440 code is not printed on the SS1/SS2 page of this catalog edition, though the neighbouring EOCR-SS / AR pages do list a 320–480 VAC option — so treat 440 as a later addition and confirm the control voltage from the unit's own label before quoting

ข้อมูลตามเอกสารผู้ผลิต (Samwha EOCR) — รายละเอียดฉบับเต็มดูจาก Datasheet ด้านล่าง

📥 Downloads — เอกสารสำหรับขออนุมัติโครงการ

รุ่นที่เกี่ยวข้อง

จำหน่ายโดย หจก. เอส เอ วี เมคคานิคคอล เซอร์วิสส์ แอนด์ ซัพพลายส์ — สอบถาม/ขอใบเสนอราคา: ติดต่อเรา